View 30DBL0537-QC_629958.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

14.0-17.0/28.0-34.0 GHz Active Doubler QFN, 5x5mm
April 2006 - Rev 10-Apr-06
30DBL0537-QC
Features
Integrated Gain, Doubler and Driver Stages Self-biased Architecture +21.0 dBm Output Power 35.0 dBc Fundamental Suppression RoHS Compliant 100% On-Wafer RF, DC and Output Power Testing
General Description
Mimix Broadband's 14.0-17.0/28.0-34.0 GHz SMD Active Doubler delivers +21dBm of output power. The device integrates a gain stage, passive doubler and driver amplifier into a single device. The device provides better than +21dBm of saturated output power and has over 20dB of doubled gain with excellent harmonic rejection. The part is designed with a self-biased architecture which requires a single 5V supply. The device comes in a 5x5 mm QFN surface mount package offering excellent RF and thermal properties and is RoHS compliant. This device is well suited for Millimeter-Wave Point-to-Point, LMDS, SATCOM and VSAT applications.
Absolute Maximum Ratings
Supply Voltage (Vd) Supply Current (Id) Gate Bias Voltage (Vg) Input Power (RF Pin) Storage Temperature (Tstg) Operating Temperature (Ta) Channel Temperature (Tch)
+6.0 VDC 300 mA +0.3 VDC TBD -65 to +165 OC -55 to MTTF Table1 MTTF Table 1
(1) Channel temperature affects a device's MTTF. It is recommended to keep channel temperature as low as possible for maximum life.
Electrical Characteristics (Ambient Temperature T = 25 oC)
Parameter Input Frequency Range (fin) Output Frequency Range (fout) Input Return Loss (S11) Output Return Loss (S22) Fundamental Leakage (fin) Third Harmonic Leakage (3 x fin) RF Input Power (RF Pin) Output Power at +4.0 dBm Pin (Pout) Drain Bias Voltage (Vd) Supply Current (Id) (Vd=5.0V Typical) Units GHz GHz dB dB dBc dBc dBm dBm VDC mA Min. 14.0 28.0 Typ. TBD TBD -35.0 -30.0 +4.0 +21.0 +5.0 200 Max. 17.0 34.0 +5.5 240
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
14.0-17.0/28.0-34.0 GHz Active Doubler QFN, 5x5mm
April 2006 - Rev 10-Apr-06
30DBL0537-QC
2xFin Output Power (dBm), Pin = 4 dBm
25
Doubler Measurements
20
2xFin Pout (dBm)
15
10
5
0 26 27 28 29 30 31 32 33 34
Fout = 2xFin (GHz)
Fundamental Leakage (dBm), Pin = 4 dBm
0
-5
Fund. Pout (dBm)
-10
-15
-20
-25
-30 13 13.5 14 14.5 15 15.5 16 16.5 17
Fout = Fin (GHz)
3xFin Output Power (dBm), Pin = 4 dBm
10 5 0
3xFin Pout (dBm)
-5 -10 -15 -20 -25 39 40 41 42 43 44 45 46 47 48
Fout = 3xFin (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
14.0-17.0/28.0-34.0 GHz Active Doubler QFN, 5x5mm
April 2006 - Rev 10-Apr-06
30DBL0537-QC
Package Outline
PCB Layout Pin Designation
Pin 4 21 28 Description RF In RF Out Bias
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
14.0-17.0/28.0-34.0 GHz Active Doubler QFN, 5x5mm
April 2006 - Rev 10-Apr-06
30DBL0537-QC
App Note [1] Biasing - This device is operated by biasing Vd with +5.0 V and Id=200mA.
MTTF Tables (TBD)
Backplate Temperature 55 deg Celsius 75 deg Celsius 95 deg Celsius
These numbers were calculated based on accelerated life test information and thermal model analysis received from the fabricating foundry.
Channel Temperature deg Celsius deg Celsius deg Celsius
Rth
MTTF Hours
FITs
C/W C/W C/W
E+ E+ E+
E+ E+ E+
Bias Conditions: Vd=5.0V, Id=200mA
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
14.0-17.0/28.0-34.0 GHz Active Doubler QFN, 5x5mm
April 2006 - Rev 10-Apr-06
30DBL0537-QC
Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human
body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support
devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package
compatible with high volume solder installation. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes.
Part Number for Ordering Description
30DBL0537-QC-0N00 30DBL0537-QC-0N0T PB- 30DBL0537-QC
Ni/Cu plated RoHS compliant QFN 5x5 32L surface mount package in bulk quantity Ni/Cu plated RoHS compliant QFN 5x5 32L surface mount package in tape and reel 30DBL0537-QC Evaluation Board
We also offer this part with alternative plating options. Please contact your regional sales manager for more information regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 5
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.

▲Up To Search▲

Price & Availability of 30DBL0537-QC

	To Download 30DBL0537-QC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .